Our Labs

Arabcal is the largest Calibration Lab in UAE with dedicated labs for various parameters and mobile calibration facility. Our full-fledged labs are equipped with state of the art equipment to meet the challenging testing requirements of diverse industry verticals.

  • TORQUE CALIBRATION LAB
  • TEMPERATURE LAB
  • PRESSURE LAB
  • ELECTRICAL LAB
  • RF ELECTRONICS LAB
  • GAS LAB
  • MEDICAL & ANALYTICAL LAB
  • HV/ELECTRICAL TEST EQPT LAB
  • DIMENSION LAB
  • FLOW & VALVE
  • LOAD CELL

Torque Calibration Lab

A unique facility with fully automated Torque Calibration System, Supplied by CDI USA, installed by SnapOn. The Technicians are trained by SnapOn and the facility is maintained as per SnapOn standard requirement to become Snap-On Authorised Service & Calibration Centre.

The lab for its full capability is accredited to ISO 17025 with the best measurement capability and uncertainty of measurement.

Capabilities Lab On-site
Torque Wrenches
Torque Indicators
Torque Spanners
Torque Screwdrivers
Pneumatic/Hydraulic Wrenches
Torque Testers
Torque Transducers

TEMPERATURE LAB

Equipped with various high accurate Temperature Calibrators and Reference Standards, capable to offer Calibration of temperature devices up to 1200 ̊C. We also perform Temperature Survey according to API and AMS Standards. Temperature mapping for incubators, autoclaves and other critical instruments with ISO17025 accreditation. IR instruments calibration with high accurate black-body source.

ISO17025 accredited temperature calibration from -40 to +650 ̊C.

Capabilities Lab On-site
Digital Indicators & Probes
Glass Thermometers
Ear Thermometers
Climatic Chambers
Autoclaves, Ovens, Refrigerators & Chillers
Temperature Survey & Mapping
Dry block & Liquid bath calibrators

PRESSURE LAB

With variety of Primay & Secondary Standards, we offer pressure calibrations in the lab, at client site and plant as per requirements and according to the standards. The lab and onsite calibration is now accredited to ISO17025 for a wide range from -1 to 1400 Bar / 20000 PSI.

Capabilities Lab On-site
Gauges
Transducers
Transmitters (Smart)
Test Gauges
Compound Gauges
Indicators & Controllers
Deadweight Testers
Pneumatic / Hydraulic Calibrators

ELECTRICAL LAB

The first ISO17025 accredited lab with capability of source & measurement of all electrical parameters (V, mv, A, mA, Ohms, Hz, etc..). The facility is equipped with most modern calibration standards to carry out various electrical & electronic Test & Measuring Instruments in the Lab & out at client’s facility with best measurement capability and uncertainty.

In addition to the general electrical instruments we are not accredited for Insulation Testers and Clamp Testers.

Capabilities Lab On-site
Digital Multiemters
Ammeters / Clamp Testers
Decade Resistance / LCR Boxes
LCR Meters
Process Calibrators / Meters
Frequency Counters / Generators
Oscilloscope
Insulation Testers / MegOhm Meters
RCD / ELCB Testers
Ground Testers
Variable Auto Transformers
ESD Floor Matt / ESD Testers

RF ELECTRONICS LAB

Arabcal recently added the facility with up to date calibration standards from the leading brands of RF instruments. Our QA/QC in the process of obtaining the accreditation and working closely with authorities to complete the accreditation.

The facility is now capable to calibrate almost all type of RF and Fibre Optic instruments.

Capabilities Lab On-site
Active Probe  
AM/FM Source  
Amplifier  
Antenna Tester  
Cable Fault Tester  
Cable Loss Test Set  
Coaxial Fixed Attenuator  
Communication Receiver  
Crystal Detector  
DC Block  
Digital Communication Test Set  
Diplexer  
Directional Bridge  
Directional Coupler  
Distance to Fault (DTF) Meter  
Dummy Load  
Duplexer  
Filter  
Frequency Counter  
Frequency Oscillator  
Frequency Reference Standard  
Limiter  
Mixer  
Modulation Analyser  
Oscilloscope  
Peak Power Meter/ Sensor  
Power Detector  
Power Divider  
Power Element  
Power Meter/ Sensor  
Power Splitter  
Precision Detector  
Programmable Attenuator  
Pulse Generator  
Radio Communication Test Set  
RF Millivoltmeter  
RF Probe  
RF Thruline Wattmeter  
Scalar Network Analyzer  
Signal Generator  
Spectrum Analyser  
Step Attenuator  
Sweep Oscillator  
Termination  
Universal Counter  
Variable Attenuator  
Vector Network Analyser  
Vector Signal Analyser  
VHF/UHF Radio Tester  
VSWR Meter  
Waveform / Function Generator  

GAS Lab

Our gas calibration facility was initially built for gas detection instruments calibration and related repairs. We are closely working with various manufacturers and the technicians are trained by BW Technologies, who assists us to upgrade the calibration procedures when the new models are introduced. In addition to the personal and fixed gas monitoring systems, we are now capable to calibrate SF Gas Analysers, Gas Moisture Meters and Dew-point Analysers and meters.

Capabilities Lab On-site
Flue Gas Analysers
Exhaust Analysers
Personal Gas Detectors (Oxygen, LEL, H2S, CO, ……..)
Fixed Gas Detectors and Alarm systems
SF6 Gas Analysers
Moisture Analysers
Dew-point Meters & Analysers

MEDICAL & ANALYTICAL LAB

It is yet another speciality of arabcal, a dedicated lab for Testing & Calibration of Medical Test Instruments. This facility is also equipped for Calibration of Mass & Volume Instruments with high accuracy calibration standards. It is the only laboratory in the region using ratio metric photometry method for calibration of micro pipettes as low as 0.1 micro litres up to 5000 micro litres. This method ensures the best uncertainty when compared to gravimetric calibration. The facility is accredited to ISO17025:2005 and also capable to calibrate all kind of analytical instruments.

Capabilities Lab On-site
Weighing Scales
Test Weights Class F, F1, M, M1
Micro pipettes
Burettes
Conical Flask
Measuring Jars/Cylinders
PH, Conductivity, TDS Meters
Turbidity Analysers / Indicators
Chlorine Analysers/Indicators
Salt Contamination Meters
Bathy Corrometer
Defibrillator & Defibrillator Analysers
Patient Simulator
Infusion Pump / Infusion Pump analyser
SPO2 Analyser / Pulse Oxymeter
Ear Thermometer
Spigmo-manometers

HV/ELECTRICAL TEST EQPT LAB

With trained engineers from various test equipment manufacturers like Megger, Programma, Seba KMT, ISA – Italy, Phoenix – USA, we keep a separate lab for HV and other electrical Test equipment.

It is the only facility to calibrate various type of Test Instruments according to manufacturer’s procedures and their calibration standards.

Capable to calibration HV AC/DC up to 200 kV. Tan Delta, BDV, CT and many other purposes built test equipment for Power Industries.

Capabilities Lab On-site
HV Test Set AC/DC
HV Oil Test Set
Primary & Secondary Current Injection Test Sets
Tan Delta & Transformer Analysers
Relay Test Systems
Circuit Breaker Analysers
Time Domain Reflectometer
Cable Fault Locating Systems

DIMENSION LAB

The dimensional laboratory is equipped with various length measuring standards for internal & external length measurements. The facility is now accredited for various precision measuring instruments and being upgraded to meet the growing requirement to support the manufacturing industries in the region.

Capabilities Lab On-site
Inside / Outside Micrometers
Dial Indicators
Vernier Calipers
Height Gauges
Foil Thickness Gauges
Profile Gagues
Coating Thickness Gauges
U/S Thickness Gauges
Rubber Hardness Testers (Shore A & D)

FLOW & VALVE

It is the only such facility in the region, a professional custom built Flow-meter Calibration Skid capable to generate various flow rates on different size flow lines with Master Flowmeters. This wide area also equipped with Valves Testing, Refurbishing facility for Safety Valves, Control Valves and Gate Valves.

In addition a fully load facility is available to carry out the Valve job at customers sites.

Capabilities Lab On-site
Flowmeter
U/S Flowmeters
Pressure Safety Valves
Control Valves
Magnetic Level Indicators/Switches
Pressure Testing of Valves, Spools, Air Received Tanks
Air Compressor

CRANE SCALES / TENSILE & COMPRESSION LOAD CELL

We are capable to Calibration heavy Weighing Scales, Tensile & Compression Load Cells. The Calibration is accredited to ISO17025:2005 up to 1000 Kg. in lab and at customer site.

We undertake various kinds of repairs for Weighing scales and Load Cells.

Capabilities Lab On-site
Crane Scales / Tensile Load Cells
Platform Weighing Scales
Compression Load Cells